flexiblefullpage -
Currently Reading

The Lean and Green Blog: Lesson 3 - 'Lots' of opportunity

billboard -
Best Practices

The Lean and Green Blog: Lesson 3 - 'Lots' of opportunity

November 29, 2011

Down here in the south, you will often hear the phrase, “If it ain’t broke, don’t fix it.” When it comes to lot preparation, we seem to fix a lot of things that were never broken in the first place. Just think back to the last lot you prepared for construction that, remarkably, had no measurable vegetation. I might be wrong, but that doesn’t seem to be the natural order of things.

When working through the opportunities in sustainable construction techniques, lot preparation can increase your “green” footprint at a significant overall savings. Clearing a lot completely removes trees and plant life that must be replaced prior to final inspection. Clearing also creates additional cost in the area of erosion control. Depending on your municipal requirements, costs can be rather high to restore vegetation.

This is not to say that construction activities will not require the removal of natural vegetation from the property. The key is to limit the clearing to the area required for construction activities and save as much of the natural vegetation as possible. 

I recently spoke with a fellow builder who will soon be saddled with the cost of installing sod on the entire lot because of a new city requirement to have established vegetation before a certificate of occupancy will be issued. I suggested fencing off the lot behind the house 15’ beyond the back corner and maintain the native grass. The reduction in cost for sod will mean $100’s to the bottom line. 

For most builders, the opportunity is not just to control projected increases, but to reduce current costs today through better development and construction processes.  If cost control is your particular challenge, this greener alternative is better than nothing.

Or, as we say in the South, “When life gives you lemons, make lemonade.”

Related Stories


A Case for Compact Duct Layouts

Conventional duct layouts place HVAC supply registers near exterior walls because those locations used to make sense: Homes of the past were poorly…
Design Details

Design Details: Above the Fray

In a densely populated Seattle neighbor­hood, two adjacent infill sites were developed: The Lookout and Shake Shacks


Backstory: Logical Thinking

How a small architecture and construction firm in Maine became a leader in the prefab and passive House movements

Best Practices

Guest Columnist: Evaluating Risks and Cost Before Buying Land

Finding the right building site with no issues can be trick; that's where scrubbing the lot could help


Selections Strategy

Collaboration holds the key to a smoother selections process that satisfies both client and builder

Best Practices

Light Touch

Understanding these basics will help you create better lighting transitions


Time-Machine Lessons

We ask custom builders: If you could redo your first house or revisit the first years of running your business, what would you do differently?


Guest Columnist: Boost the Efficiency of Your Building Process

Valuable insights Architect Robert Hidey gleaned over decades of residential design experience


Backstory: Green Gables Opens Up Every Aspect of its Design/Build Process to Clients

"You never want to get to the next phase and realize somebody's not happy."



Strategies for Maximizing Profit

Custom home builders talk about what they do on the front end of a project to achieve better margins

boombox1 -
boombox2 -
native1 -

More in Category

native2 -
halfpage1 -